I am currently waiting on my FAS DPD to be delivered. In the mean time I have decided to get my water tested at the local pool store (assuming it must be better than the strips that I have). My test results were as folows:
CYA: 0
Total Chlorine 9.2
Free Chlorine 8.2
PH 7.7
Total Alkalinity 98
Adjusted Alkalinity 98
Total Hardness 74
I had a small amount of iron (0.3) and copper (0.1) but the store owner said that it was so little and not to worry about it. He recommended that I increase my Alkalinity and hardness, decrease my pH, add stabalizer and algecide, and continue shocking my pool until it is clear.
Thoughts?
CYA: 0
Total Chlorine 9.2
Free Chlorine 8.2
PH 7.7
Total Alkalinity 98
Adjusted Alkalinity 98
Total Hardness 74
I had a small amount of iron (0.3) and copper (0.1) but the store owner said that it was so little and not to worry about it. He recommended that I increase my Alkalinity and hardness, decrease my pH, add stabalizer and algecide, and continue shocking my pool until it is clear.
Thoughts?