I've recently had my 20x40x9 IG pool remodeled. We removed an old ladder, added a bench/exit in the deep end, added a tanning ledge, new step in spa, new skimmers, new tiles, new coping, and split the drains for safety. We used Smoke Sunstone as plaster, and fireglass tiles for toe-tiles.
https://picasaweb.google.com/claude...authkey=Gv1sRgCJ6J_6zWlOfA1QE&feat=directlink
We love the 1" fireglass toe-tile, it glows all night long, and we wish we had used much more of it, but we're about two weeks too late to make that change. How can I add more?
This may seem crazy since this build is so new, but if I wanted to add random tile accents to the tanning ledge, could I take a chisel, or diamond bit cutting saw, and cut out a 1.5" square area down to the gunnite, and use matching plaster to put in piece of new tile? I would probably need to treat the patch like the new plaster was treated (dry, acid wash, rinse, fill, and brush daily for a week).
Crazy enough to work, or just plain crazy?
https://picasaweb.google.com/claude...authkey=Gv1sRgCJ6J_6zWlOfA1QE&feat=directlink
We love the 1" fireglass toe-tile, it glows all night long, and we wish we had used much more of it, but we're about two weeks too late to make that change. How can I add more?
This may seem crazy since this build is so new, but if I wanted to add random tile accents to the tanning ledge, could I take a chisel, or diamond bit cutting saw, and cut out a 1.5" square area down to the gunnite, and use matching plaster to put in piece of new tile? I would probably need to treat the patch like the new plaster was treated (dry, acid wash, rinse, fill, and brush daily for a week).
Crazy enough to work, or just plain crazy?