I know there are a lot of DIY'ers here so I figured I'd give this question a shot.
I removed a door to fix the weather stripping on the bottom as it was falling off. When I put the door back on it didn't really seem to line up. The reaveal on the hinge side at the bottom is pretty much non existent. So I'm looking for some help as to getting the reaveal equal as it should be and to get the door to shut properly. It has self closing hinges at the top and bottom and a regular hindge in the middle. The door worked perfectly before I started messing with it.
Thanks for your help.
I removed a door to fix the weather stripping on the bottom as it was falling off. When I put the door back on it didn't really seem to line up. The reaveal on the hinge side at the bottom is pretty much non existent. So I'm looking for some help as to getting the reaveal equal as it should be and to get the door to shut properly. It has self closing hinges at the top and bottom and a regular hindge in the middle. The door worked perfectly before I started messing with it.
Thanks for your help.