Question about installing Solar Bear Panels in Parallel...

[Brannon132]

Thanks Ike!

My plumbing 2", I have 2 skimmers and 1 return that is a 1" eye.

My operating pressure when I'm bypassing both the solar panels and the propane heater is just over 15psi.
For a test I ran all the water to the solar panels and raised the pressure 4psi. (instructions say to raise it 5-7)

Don't know if this helps...

Thanks, Brannon

 

[Brannon132]

With this setup do you think I would be ok to push all the water through the solar panels?

Thanks, Brannon

 

[Isaac-1]

I think full flow through the panels is probably marginally high at this point

 

[Brannon132]

If I were to add another panel and go from 32gpm to 48gpm do you think I would be fairly safe?

Thanks, Brannon

Ps. You Rock!

 

[Isaac-1]

Yes I do