Hey all,
I'm trying to hook up our Hydroroyal RA 110 heatpump up to our Intex pool (big one 32'x16'x52") and the heatpump guys made it seem so simple, ha! So the unions on the heatpump are 2" PVC. I believe the hosing on the Intex is 1.2". The heatpump is approx 18.5 ft from filter/pump, and 24ft from outlet into pool. Should I use 2" PVC piping or the 1.5" piping to try to save pressure? (Using adapters?? What kind I'm so confused.)Our pump is 0.52 HP. What is the best way to plumb this? When using threaded connections do you use PVC glue or just tape? I have never done any piping work. Including a picture of the port on the heatpump.
I'm trying to hook up our Hydroroyal RA 110 heatpump up to our Intex pool (big one 32'x16'x52") and the heatpump guys made it seem so simple, ha! So the unions on the heatpump are 2" PVC. I believe the hosing on the Intex is 1.2". The heatpump is approx 18.5 ft from filter/pump, and 24ft from outlet into pool. Should I use 2" PVC piping or the 1.5" piping to try to save pressure? (Using adapters?? What kind I'm so confused.)Our pump is 0.52 HP. What is the best way to plumb this? When using threaded connections do you use PVC glue or just tape? I have never done any piping work. Including a picture of the port on the heatpump.
Attachments
Last edited: