Hi, looking for help please on Hayward 2.7 Tristar VSP pump, little less than 2yrs old.
Symptom = pump looks completely unpowered, pump control panel has no display. Ran for 30min or so, then it tripped breaker when it happened. Using Omnihub setup
Troubleshooting = 1) turned all breakers back on and staying on, 2) tried running the pump, no activity, 3) opened wiring to the motor control box and I believe I am reading 120v red wire, and 120v black wire to circuit board, so it looks like I'm getting power to the motor (so shouldn't display unit be working at this point at least?).
Observations = I also see couple of alarm messages on Omnihub display unit = 1) Comm Loss MSP to Device... HUA-Wiring Hub, and sometimes 2) Comm Loss MSP to Device... HUA Smart Relay. I believe #2 may be causing my pool lights from working correctly also.
Questions = would this be a capacitor issue? if capacitor issue, shouldn't I at least get display unit to work on pump? Could motor have overheated? (live in Texas)
Any help is greatly appreciated, thank you!!
Symptom = pump looks completely unpowered, pump control panel has no display. Ran for 30min or so, then it tripped breaker when it happened. Using Omnihub setup
Troubleshooting = 1) turned all breakers back on and staying on, 2) tried running the pump, no activity, 3) opened wiring to the motor control box and I believe I am reading 120v red wire, and 120v black wire to circuit board, so it looks like I'm getting power to the motor (so shouldn't display unit be working at this point at least?).
Observations = I also see couple of alarm messages on Omnihub display unit = 1) Comm Loss MSP to Device... HUA-Wiring Hub, and sometimes 2) Comm Loss MSP to Device... HUA Smart Relay. I believe #2 may be causing my pool lights from working correctly also.
Questions = would this be a capacitor issue? if capacitor issue, shouldn't I at least get display unit to work on pump? Could motor have overheated? (live in Texas)
Any help is greatly appreciated, thank you!!