Hi, this is my first Post!
I have a Hayward Aqua Rite Swg. My pool turned green. I took the water to be tested and found out there was no chlorine. I explained that when I looked at the display, the display would cycle thru the numbers, but the lights were all out. The pool store told me to clean and reset the cell.
I cleaned the cell (t-9) and reset the unit (held the diag button for a few seconds). When I turned on the system I saw that the no flow would flash for a few seconds (~15) then the power and generating light would turn on. After 10 seconds all of the lights would turn off. While staring at the unit I noticed that about every 2 minutes the power and generating lights would turn on for a few seconds before turning off again.
Any ideas as to what could be the problem could be? If I have to replace the board I will but from what I was reading on previous post the members were able to fix the problem by means other than replacing the board.
I appreciate any and all help!
Thanks,
Luis
I have an IG 15k plaster pool with 150 cartridge 1.5 hp pump and navigator robot.
I have a Hayward Aqua Rite Swg. My pool turned green. I took the water to be tested and found out there was no chlorine. I explained that when I looked at the display, the display would cycle thru the numbers, but the lights were all out. The pool store told me to clean and reset the cell.
I cleaned the cell (t-9) and reset the unit (held the diag button for a few seconds). When I turned on the system I saw that the no flow would flash for a few seconds (~15) then the power and generating light would turn on. After 10 seconds all of the lights would turn off. While staring at the unit I noticed that about every 2 minutes the power and generating lights would turn on for a few seconds before turning off again.
Any ideas as to what could be the problem could be? If I have to replace the board I will but from what I was reading on previous post the members were able to fix the problem by means other than replacing the board.
I appreciate any and all help!
Thanks,
Luis
I have an IG 15k plaster pool with 150 cartridge 1.5 hp pump and navigator robot.