Poolvergnuegen PoolCleaner performance question...

[Magnew]

Hello! I have an older two-wheel model that, back in the day, would climb the walls when the filter was clean.

Now, with a clean filter, plenty of hose to reach the far end of the shallow end, and having just gone through a rebuild with the tune-up kit, I never see it out of the deep end.

Anybody have any suggestions?

Thanks,
mike

 

[1poolman1]

Hello! I have an older two-wheel model that, back in the day, would climb the walls when the filter was clean.

Now, with a clean filter, plenty of hose to reach the far end of the shallow end, and having just gone through a rebuild with the tune-up kit, I never see it out of the deep end.

Anybody have any suggestions?

Thanks,
mike

Check that the hose floats are still there, in the right position, and still float.

 

[Magnew]

About three feet up, as I recall? Check.
Just checked that they both still float. Check.

Anything else I should be looking at?

Thanks for responding!
Mike

 

[1poolman1]

About three feet up, as I recall? Check.
Just checked that they both still float. Check.

Anything else I should be looking at?

Thanks for responding!
Mike

Page 7 and 9 of the manual give instructions on that problem.