Ok. I ordered a replacement cell as you guys suggested. AutoPilot apparently offers a warranty of $75 towards replacement. I guess we'll see if the warranty is any good.
Well. I replaced the cell. It didn't make the problem go away. So I replaced the entire electronics box. The problem went away. The system ran great for a few days and then I started getting a "low flow" "OFF" indication. It appears that now the sensor or the cable/connector is now going bad. The problem seems to be intermittent when I remove and put the cable connector back on at the manifold. I tried to duct tape the connector and manifold to keep the connection tight, which helped for a few days. Now I'm getting a "Low Salt" "OFF" alarm. Tapping on the manifold seemed to take care of it.
Obviously, I have a sensor or cable/connector failure going on.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!
