Hello all,
New to TFP forums and I have learned a lot. Wished I would have found this site prior to build.
My issue...the builder installed our fiberglass pool mid May 2014 and it is filled with our hard well water; backfilled and water line below the ports. It is now June 8th and we are still not close to being done. We are waiting for the block guys to get done with the retaining wall so the pool house can be built which will house all of the equipment. Hence everything is at a standstill.
Do I need to treat the water to cut down on any issues with algae since the water is stagnant?
Any other things I should be doing while we wait?
We are going with a SWG system if that matters. Side note- Mineral Pure pool system with an Ozone was suggested for pool, but after reading this site we chose SWG. Good Choice?
Planning on buying the Taylor K2006 test kit and plan on the BBB method.
Any help is greatly appreciated and I am looking forward to using this forum. Maybe I'll have the answers one day, lol.
New to TFP forums and I have learned a lot. Wished I would have found this site prior to build.
My issue...the builder installed our fiberglass pool mid May 2014 and it is filled with our hard well water; backfilled and water line below the ports. It is now June 8th and we are still not close to being done. We are waiting for the block guys to get done with the retaining wall so the pool house can be built which will house all of the equipment. Hence everything is at a standstill.
Do I need to treat the water to cut down on any issues with algae since the water is stagnant?
Any other things I should be doing while we wait?
We are going with a SWG system if that matters. Side note- Mineral Pure pool system with an Ozone was suggested for pool, but after reading this site we chose SWG. Good Choice?
Planning on buying the Taylor K2006 test kit and plan on the BBB method.
Any help is greatly appreciated and I am looking forward to using this forum. Maybe I'll have the answers one day, lol.