Pool chemistry tuning

jmcmd1980

Well-known member
Jul 2, 2023
110
Lake Worth/FL
Pool Size
14500
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Aquapure 1400
Any advice on adjusting my pool chemistry based on these numbers?

FC 7.5
CC 0
pH 8.0. - I put 2-4 oz muriatic every day to lower this
TA 80
TH 250
Salt 3000
Temperature 88
CYA 70
Water clear

Jim
 
Thanks, that’s what I was hoping you’d say. What would you think a reasonable total hardness level should be? I can work my way up there. Jim
 
350 is about perfect for most people, but you get 54 inches (?) of rain annualy and thats most of a free water exchange with 0 calcium. So you'll likely be adding calcium somewhat frequently, depending on how high you go above 350 to buy some time. 450 is probably a good happy medium if your CSI agrees.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.