- May 31, 2011
- 246
- Pool Size
- 23000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Hello everyone!
FC = 10
CC = 0
pH = 7.5
CYA = 55
TA = 90
CH = 260
temp = 72F
The above test results are from my own testing but I had the pool water tested by the pool store (just to see what they say) and came up with phosphates to be 100ppb. Their test for other parameters agreed with my testing except, they said CYA was 50.
I am about to add borax as soon as FC goes below 10. Should I add phosphate neutralizer also or will borax be enough combined with proper levels of FC to keep algae in check?
Also what is the significance of TDS in the water?
Thanks!
FC = 10
CC = 0
pH = 7.5
CYA = 55
TA = 90
CH = 260
temp = 72F
The above test results are from my own testing but I had the pool water tested by the pool store (just to see what they say) and came up with phosphates to be 100ppb. Their test for other parameters agreed with my testing except, they said CYA was 50.
I am about to add borax as soon as FC goes below 10. Should I add phosphate neutralizer also or will borax be enough combined with proper levels of FC to keep algae in check?
Also what is the significance of TDS in the water?
Thanks!