Pentair Intelliflo3 VSF model 011068

[ajw22]

I think you need to configure the relay in the Pentair Home app. Did you do that?

 

[hgiljr]

I think you need to configure the relay in the Pentair Home app. Did you do that?

That did it. I need to go to school for this pump. lol

Any recommendations in scheduled programming for this pump? I was searching in the forums but did not come across recommendations.

 

[ajw22]

That did it. I need to go to school for this pump. lol

Any recommendations in scheduled programming for this pump? I was searching in the forums but did not come across recommendations.

No different then any automation scheduling.

All depends on what your pool has and how you want yo run it.

 

[hgiljr]

No different then any automation scheduling.

All depends on what your pool has and how you want yo run it.

Only automation was two speed: 4 on low and 4 on high.

I will set different schedules and see what works best.

Thanks again for all your help.

 

[Dirk]

I was searching in the forums but did not come across recommendations.

There's a similar discussion going on in a recent thread. Maybe you'll see something that will help you:

Help replacing and upgrading to SWCG and VSP system

The old Century 1HP Single Speed pump is dead. Well, it's possible it could be fixed but everything is pretty old and I'm tired of the chlorine lugging. Also have an old booster pump that I plan to rip out while I'm at it. Definitely have plenty of voltage at the pad, I think the booster and...

www.troublefreepool.com