Just performed the first test using the tf100 kit. I got here because the water has become cloudy and won't clear. The test results were:
FC- 5.5
PH - 7.2
CC - .5
CH - 400
TA - 150
CYA - 100
I assume these TA and CYA results were caused by too much shock, Algaecide, and trichlor while trying to clear up a problem after a spring storm. In any event my question is; am I correct in assuming that the best thing to do at this point would be to empty about half the water and then refill to get the TA and CYA back to normal range? I will be following your liquid chlorine methods from here on out. Thank you
FC- 5.5
PH - 7.2
CC - .5
CH - 400
TA - 150
CYA - 100
I assume these TA and CYA results were caused by too much shock, Algaecide, and trichlor while trying to clear up a problem after a spring storm. In any event my question is; am I correct in assuming that the best thing to do at this point would be to empty about half the water and then refill to get the TA and CYA back to normal range? I will be following your liquid chlorine methods from here on out. Thank you