No flow coming out of the jets....

[gocubs418]

So I was heating my pool right now and noticed it was taking an incredible amount of time to heat the pool.

I put my hand by the jets and no pressure was coming from them. I called my PB and they will have a service team out tomorrow morning.

Is there anything I can check to get the jets working again?

 

[Richard320]

Look in the skimmer basket and the pump strainer basket, too. If either of them is full, the pump will be starving and you won't get any flow. Check filter pressure. It may be clogged if the water is murky looking. .

 

[gocubs418]

Look in the skimmer basket and the pump strainer basket, too. If either of them is full, the pump will be starving and you won't get any flow. Check filter pressure. It may be clogged if the water is murky looking. .

I looked at my valves, I run my VSP at the lowest RPMs for a vast majority of the day. I believe I had it shut off a little bit too much so all the flow was directed to the waterfall/bubbler/spa fountain.

I popped it into "Service Mode" and turn the pump on and flow returned. I will have to call Jandy to set up a button to turn to high RPM mode.