Auto Pilot Dig 220- 30,000 gal inground vinyl. Opened pool yesterday and CYA was lower than 20- possibly zero. Added 12 lbs of CYA. I also added enough bleach to bring up to 12- nothing really showed up- the test stayed very light yellow. Also added 240 lbs of salt.
Here's my AutoPilot readings
Salt 3100
29v 6.5 a
64 degrees
Purifier set to 60%
I also ran boost for 24 hours- why is my cholrine not raising at all. All the stablizer is on the bottom of the pool, of course, and I know it may take a few days to dissolve. Why isn't my Auto Pilot producing chlorine (that I can tell) Is it because the sun is eating it up so fast? Is the voltage and amps ok?
I know the key is keeping bleach until the CYA can help (I think) I just can't believe Im getting no rise in CL levels, or just barely. I also am getting those little brwon algae looking thing starting to get on bottom- I sweep and later they come back.
Here's my AutoPilot readings
Salt 3100
29v 6.5 a
64 degrees
Purifier set to 60%
I also ran boost for 24 hours- why is my cholrine not raising at all. All the stablizer is on the bottom of the pool, of course, and I know it may take a few days to dissolve. Why isn't my Auto Pilot producing chlorine (that I can tell) Is it because the sun is eating it up so fast? Is the voltage and amps ok?
I know the key is keeping bleach until the CYA can help (I think) I just can't believe Im getting no rise in CL levels, or just barely. I also am getting those little brwon algae looking thing starting to get on bottom- I sweep and later they come back.