Hey all
In anticipation of getting our pool installed next Friday (7/1) I ordered the K2006 kit off Amazon (had a gift card to burn). I have tested the water from my Tap so that I can go purchase needed chemicals to get the pool ready:
Here are my numbers:
PH 7.0
FC 1.2
TA 100
CH 110
I know I dont need to do CYA since its tap water, but do I need to perform the CC test?
I plugged my number into PoolMath and got the following:
FC 78oz of 6% Bleach
PH 95oz weight of Borax
TA 0
CH 300oz weight of Calcium Chloride
CYA 72oz weight Stabilizer
Does this sound about right?
Pool is about 13,500 Gallons
Thanks!
In anticipation of getting our pool installed next Friday (7/1) I ordered the K2006 kit off Amazon (had a gift card to burn). I have tested the water from my Tap so that I can go purchase needed chemicals to get the pool ready:
Here are my numbers:
PH 7.0
FC 1.2
TA 100
CH 110
I know I dont need to do CYA since its tap water, but do I need to perform the CC test?
I plugged my number into PoolMath and got the following:
FC 78oz of 6% Bleach
PH 95oz weight of Borax
TA 0
CH 300oz weight of Calcium Chloride
CYA 72oz weight Stabilizer
Does this sound about right?
Pool is about 13,500 Gallons
Thanks!