First time dosing my (new to me) pool. Thanks to the help from this forum so far, I've calculated the size of the pool, purchased the TF-100 test kit, and tested a few times to get the results below.
Before I "dose" for the first time, here are my calculations and plan - I appreciate any feedback on whether this is right/wrong and if there is anything else I need to watch for. Thanks for the feedback.
FC - 0 ! (this was "normal" according to Leslie's back in December - yes I know that is 2 months back)
CC or TC - 0
pH -8.2
TA - 90-100
CH - 225-250
CYA - ~53
Plan with help from PoolMath - add 26 oz (volume) of Leslie's Chlor Brite (dichlor - came with the house). This should lower the pH, but raise CYA according to pool math. I would wait 24 hours to let the dichlor do it's thing and recheck pH (should I wait more/less time?). Is there any problems with CYA being too high?
Thanks all
Before I "dose" for the first time, here are my calculations and plan - I appreciate any feedback on whether this is right/wrong and if there is anything else I need to watch for. Thanks for the feedback.
FC - 0 ! (this was "normal" according to Leslie's back in December - yes I know that is 2 months back)
CC or TC - 0
pH -8.2
TA - 90-100
CH - 225-250
CYA - ~53
Plan with help from PoolMath - add 26 oz (volume) of Leslie's Chlor Brite (dichlor - came with the house). This should lower the pH, but raise CYA according to pool math. I would wait 24 hours to let the dichlor do it's thing and recheck pH (should I wait more/less time?). Is there any problems with CYA being too high?
Thanks all