Need help with PH please!!

akool

Member
Jul 14, 2022
9
Eastern NC
Cover blew off I last big storm and pool turned green...
10k Above ground pool
Cartridge filter
Trying to SLAM but I can't get the ph down to save my life!
Initial tests from TF-100
Chlorine 0
Cya 30
Akalinity 50
Ph above 8.4(showed 9.7 on calibrated ph meter)

I got akalinity up to 90 with baking soda
2 hours later I added 5lbs dry acid as directed by pool math app. Checked ph again in another 2 hours and it was only down to 8.8(ph meter)
This morning I checked again and ph was back up to 9.4, went and bought 2 gallons of muratic acid 20 Baume. Added 47 Oz to get down to 7.2 as directed by pool math.
Checked again 2 hours later ph is at 8.4 and akalinity down to 50.

What am I doing wrong ??
 
Adding baking soda and raising your TA causes your pH to rise.

Leave your TA alone and adjust your pH. Check your pH 15 minutes after adding acid, not 2 hours. If pH is 7.5 or less start the SLAM Process
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.