- Jun 28, 2018
- 19
- Pool Size
- 10000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Returned from two week vacation to a slightly cloudy pool. SLAMed for the past three days.
Starting measurements:
CYA - 40
pH - 7.8
TA - 150
FC - 0
Dosed to bring pH to 7.4. Then dosed to bring FC to 16 and have been holding it there with 4 checks a day.
Yesterday it looked dang clear by the end of the day, and CC had fallen from 2.0 at the start to 1.0 as of yesterday noon.
I figured it was time to do an OCLT. I passed with 0.5 loss in FC. However, my CC remains at 1.0
I know this means I must continue slamming. Do I need to re-perform the OCLT test, or do I just maintain SLAM levels until CC drops to 0.5?
Starting measurements:
CYA - 40
pH - 7.8
TA - 150
FC - 0
Dosed to bring pH to 7.4. Then dosed to bring FC to 16 and have been holding it there with 4 checks a day.
Yesterday it looked dang clear by the end of the day, and CC had fallen from 2.0 at the start to 1.0 as of yesterday noon.
I figured it was time to do an OCLT. I passed with 0.5 loss in FC. However, my CC remains at 1.0
I know this means I must continue slamming. Do I need to re-perform the OCLT test, or do I just maintain SLAM levels until CC drops to 0.5?