Our main plumbing line which goes thru the pump, filter, heat pump, and SWG has 16 90 degree fittings within the equipment room. All of the 2 inch pipes also enter or return right next to each other. I would like to at least switch to two 45 degree fittings for each 90 degree and also reduce the number of fittings. If I supplied diagrams and photos is there someone I could hire to do an efficient design? The closest person with any pool talent is over 300 miles away. Also, since some lines do not have shut off where they need to be cut and rerouted does this mean that the pool would have to be totally drained to accomplish this project?