Hello. I'm new to the forum and am looking to get some help with the latest problem with my SWG. I live in Orlando, FL and have a 12,000 gal in ground pool with an Aquarite SWG.
The last two times I had the water professionally tested, everything checked out fine. The pool chemistry was all in order. However the SWG's salt readings were very low. Actual tested salt level: 3500 ppm. SWG reading:1400.
When turned on, the cell begins to generate chlorine but shuts down after a short while. While it's running, voltage level is around 25, amperage is around 3.5.
I recently replaced the original Aquarite T-15 cell (8 years old) with a new aftermarket T-15 cell with no improvement. About 3 years ago I replaced the board, revision 1.58, and last year I replaced the [quarter sized black thing] on the board (the proper name escapes me at the moment, sorry).
Any help would be greatly appreciated.
The last two times I had the water professionally tested, everything checked out fine. The pool chemistry was all in order. However the SWG's salt readings were very low. Actual tested salt level: 3500 ppm. SWG reading:1400.
When turned on, the cell begins to generate chlorine but shuts down after a short while. While it's running, voltage level is around 25, amperage is around 3.5.
I recently replaced the original Aquarite T-15 cell (8 years old) with a new aftermarket T-15 cell with no improvement. About 3 years ago I replaced the board, revision 1.58, and last year I replaced the [quarter sized black thing] on the board (the proper name escapes me at the moment, sorry).
Any help would be greatly appreciated.