Ok, forgive me if I am not using the corrects words but my neighbor says my pool isn't working correctly because it doesn't gush out of the returns. My pool is T shape...the top of T is all shallow and it's the size of a rectangle pool..the middle of the T is all deep. I have the following: slide, waterfall, double chairs, Aqua genie skimmers with the blowers-2 of them. It is 35000 gal...I have a 1hp motor on my pump. It doesn't cause a big ripple and the skimmers aren't sucking stuff in like crazy but it seems to make its way to the skimmers. I can't use all of the accessories at the same time bc low pressure. Neighbor said its not right that it should be more but my pool is more than twice the size of hers...,which also means more plumbing to go to all this stuff. I run it on inlet so the 2 main drains work and the 2 skimmers. My filter pressure runs around 17psi... Even after backwash. I think it just needs a 1.5hp or 2hp motor but the pool people installed a 1hp. I have the SWG too... T-15 cell. I worry that something is wrong bc of what she says so I wanted to see what you thought. You guys are great by the way... I fixed my SWG board by soldering a new current limiter this week and I troubleshot it by what you guys posted... Ty!!!