I hadn't tested for awhile and these are the results:
Cl 12
cc.5
PH 8.5++
ch 750
Al 100
CYA 20
Tests were done this morning on a somewhat cloudy day. I have added 20 oz or so of muriatic acid and will test ph in another hour.
Ch has always been high, its the CYA that I'm concerned about. Pool math says to add 83 oz of stabilizer. I have some but will get more.
Pool is as clear as can be but I think I have black algae on the ceramic trim at the water line. I have scraped about half of the tile, using a steel brush, and should finish it today.
Question is should I slam it or just raise the cl to 15 or so and maintain that?
Cl 12
cc.5
PH 8.5++
ch 750
Al 100
CYA 20
Tests were done this morning on a somewhat cloudy day. I have added 20 oz or so of muriatic acid and will test ph in another hour.
Ch has always been high, its the CYA that I'm concerned about. Pool math says to add 83 oz of stabilizer. I have some but will get more.
Pool is as clear as can be but I think I have black algae on the ceramic trim at the water line. I have scraped about half of the tile, using a steel brush, and should finish it today.
Question is should I slam it or just raise the cl to 15 or so and maintain that?