- Oct 23, 2008
- 90
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I'm using the Hayward Sense & Dispense and OPR control; the tube for the influent is after the 4 cartridge filter. When I'm testing for chlorine, the difference between the pool water and the test cell is about 4 ppm (pool water higher than test cell, 2.0 vs. 6.0). I've tested for adequate suction from the test cell and it empties a small bucket in no time and there is plenty of water coming from the influent tube.
Would I have more accurate results if I moved the influent port to a location between the pump and filter?
Thanx.
Would I have more accurate results if I moved the influent port to a location between the pump and filter?
Thanx.