I got a Coleman index pool from my kids and bought a new pump for it this yr. Hooked everything up turned it on set the timer to 12 and put chemicals in and went to bed. Got up this morning go out to check on it pump was not running so put it on where it will run with out timer still won't come on checked to make sure filter was good. Checked the gfi it's flashing green. So not sure if I'm missing something any thoughts would be appreciated.
Krystal clear filter pump model number 633t
- Thread starter Craziness2005
- Start date
Welcome to TFP.
Have you hit the TEST button on the GFCI? Then reset it. Usually a light is OFF if the GFCI is working and then a light comes on if it is tripped. But there are different types of GFCI receptacles so it is always best to hit the TEST button to trip it then reset so you know that it is working. Then apply the load to it after you have done the test.
Have you hit the TEST button on the GFCI? Then reset it. Usually a light is OFF if the GFCI is working and then a light comes on if it is tripped. But there are different types of GFCI receptacles so it is always best to hit the TEST button to trip it then reset so you know that it is working. Then apply the load to it after you have done the test.