- Jul 31, 2015
- 102
- Pool Size
- 22000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I recently changed the schedule on my Jandy iAqualink due to heavy rain. I noticed the pool vacuum wasn't running normally so I popped it in service mode, then when I turned it on the valves were switching to spa mode upon start up. I checked the app and saw spa mode was on so I turned it off. Is there anything that might triggering spa mode or is it possible I turned it on by accident and it stayed that way?