Hi
I have the FL-5 error code which usually means a brownout or low power condition. I have given it the 3 min to reset itself and still an issue. I have tested the incoming power at A and B and reads 123V and 123V.
Every reading from step 1 to 6 is not 24VAC but 27VAC, not sure if that makes a difference. For the pressure switch, the black wire is zero. I think that is because water was not running, but i do not think that would have anything to do with the FL-5 condition.
Any thoughts here?
![1603582382144.png 1603582382144.png](https://www.troublefreepool.com/data/attachments/149/149618-090c6e5c2988e62155b2e89d0bd303d1.jpg)
I have the FL-5 error code which usually means a brownout or low power condition. I have given it the 3 min to reset itself and still an issue. I have tested the incoming power at A and B and reads 123V and 123V.
Every reading from step 1 to 6 is not 24VAC but 27VAC, not sure if that makes a difference. For the pressure switch, the black wire is zero. I think that is because water was not running, but i do not think that would have anything to do with the FL-5 condition.
Any thoughts here?
![1603582382144.png 1603582382144.png](https://www.troublefreepool.com/data/attachments/149/149618-090c6e5c2988e62155b2e89d0bd303d1.jpg)