to go from the intex fittings I used a trick i learned on this board.. A 1 1/2 inch conduit box adapter (found in the electrical area of hardware store) will fit inside one of the connectors from the Intex hoses. You then glue 1 1/2 in PVC pipe to this adapter.
Go to the post in this link http://www.troublefreepool.com/custom-pvc-pipe-adapter-for-intex-pools-t28971.html
about halfway down the page there is a post from Rªzª.
You will see something very similar to the conduit adapter I used. The one I found did not have any bumps & needed no modification.
Go to the post in this link http://www.troublefreepool.com/custom-pvc-pipe-adapter-for-intex-pools-t28971.html
about halfway down the page there is a post from Rªzª.
You will see something very similar to the conduit adapter I used. The one I found did not have any bumps & needed no modification.