we are first time pool owners. just filled our pool a few weeks ago. I'm trying attempting to get our intelliflow vs set up properly. our pool is approx 17600 gal. (does not include the attached spa), pebble sheen (if this matters) and free form design. we're running an intelliflow vs, clean n clear plus, whisper flow pump for water features, intellichlor salt gen, max-e-therm 400k heater and an easy touch... we are also using the new dolphin m400 robotic cleaner, not sure if this matters, but wanted to provide any and all possible information i can. currently our pump has been running 24/7 @ 2500rpm as set up by the local pentair rep that installed the easy touch. this evening I've logged into our easy touch by computer for the first time. i lowered the rpm's to 1700 this evening. I'm really unaware if this will be correct or not, and haven't received much help from our pb. we are in the tulsa,ok area if thats needed for anything. any help or guidance would be much appreciated, as this is a very new venture for our family!