So yes, I have Googled this extensively. I have a Cutler & Hammer box which takes Eaton breakers. The pump trips every day at a random time - it does not always correlate with speed change or even weather (I had it stay on during a heavy thunderstorm and go off in the middle of a sunny afternoon). The circuit is a dedicated 20amp circuit with nothing else on it but the pump.
Here's the odd ball thing: The pump doesn't trip the the regular non-GFCI breaker, only the GFCI one (220CHF).
My question is has anyone solved this WITHOUT using the Siemens breaker which would require me to install a subpanel?
Can I run the pump without the GFCI breaker on it? It was like that before I bought the house for years with no issue (not that it makes it right).
Looking for some advice!
Here's the odd ball thing: The pump doesn't trip the the regular non-GFCI breaker, only the GFCI one (220CHF).
My question is has anyone solved this WITHOUT using the Siemens breaker which would require me to install a subpanel?
Can I run the pump without the GFCI breaker on it? It was like that before I bought the house for years with no issue (not that it makes it right).
Looking for some advice!