Intelliflo Relay Wiring

[Remophx]

I bought an Intelliflo3 pump with the I/O board. Can someone help me wire my Hayward Salt Cell into it? I previously had it hooked up to a timer and it worked but the relay set up was different. Trying to figure out how many of the relay terminals I will need to use and where to plug in what.

 

[ajw22]

Welcome to TFP.

Looks like your SWG is wired for 120V.

• Black wire from CB to Supply L1
• Black wire to SWG to Device L1
• Wire nut white neutrals together.

THHN/THWN 14 gauge or 12 gauge wire should be used depending on CB amperage. Not romex in conduit which it looks like was used.