- Jul 12, 2013
- 290
I received my IntelliChem yesterday from the PB so that I could take it apart, stare at it and see how I wanted to use it. Here is my question- what is this for and where does it go?
On one end it is 3/8's compression and on the other it is 1/4 compression. But where does this go in the system? This is my guess and you all tell me if I am correct. Somewhere I read that the outlet for the flow canister has to be smaller than the inlet so that the water will only flow one way. So I am guessing that it goes after the canister, but before the outflow connects back to the return line (of course after the heater). Thanks in advance.
On one end it is 3/8's compression and on the other it is 1/4 compression. But where does this go in the system? This is my guess and you all tell me if I am correct. Somewhere I read that the outlet for the flow canister has to be smaller than the inlet so that the water will only flow one way. So I am guessing that it goes after the canister, but before the outflow connects back to the return line (of course after the heater). Thanks in advance.