Thank you members!
I just found this site and I am impressed with threads read so far. Can any one help me with installing new switches on my Actuator. Mine are CVA24 but do not show a T at the end of the model #. The switches seem to be attached to the base plate but I cannot tell if they pry out or attached some other way. One sits lower on the cam lever? than the other one.
When switching from spa to pool; the pool valve does not return and the spa continues to drain into the pool till empty. Many think the problem is with the inexpensive micro switches, so that would be my first change. Does the capacitor have to be discharged before removing the switches/ If so what is the best way to discharge it. Any help will be greatly appreciated.
17000 gallon in ground gunite pool with sunshelf and spa emptying into square shaped pool.
I just found this site and I am impressed with threads read so far. Can any one help me with installing new switches on my Actuator. Mine are CVA24 but do not show a T at the end of the model #. The switches seem to be attached to the base plate but I cannot tell if they pry out or attached some other way. One sits lower on the cam lever? than the other one.
When switching from spa to pool; the pool valve does not return and the spa continues to drain into the pool till empty. Many think the problem is with the inexpensive micro switches, so that would be my first change. Does the capacitor have to be discharged before removing the switches/ If so what is the best way to discharge it. Any help will be greatly appreciated.
17000 gallon in ground gunite pool with sunshelf and spa emptying into square shaped pool.