Iground Pool corner replacement part.

Scan

0
Jun 12, 2015
8
Vancouver B.C.
HI
pool 12 x 24 in ground.
Corner trim & concrete cracked & lifting.
I have removed the concrete & exposed a cracked corner trim piece.
I looking for a replacement corner piece
I can make out the made date 1979 but no part number.
Is this part still available?
If i file some of the bottom flange I can make it sit a lot better & replace with new concrete in the exposed area.
Thank You
Stu
108440

108445

108446

108448
 
Call Inyopools. They can sometimes find parts. If they can, you will need to have them send it to a mail drop at the US border and drive over to get it.

Take care.
 
That's either a 6" or 12" radius corner coping trim in a cove style. As long as the height and curve match on front anything will do. Many manufacturers make that style coping. Just screws to the top of the steel wall


Second look its 6" corner measures about a foot total length. Check it with a tape measure
 
  • Like
Reactions: Arizonarob
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.