- Jan 24, 2023
- 9
- Pool Size
- 50000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Astral Viron eQuilibrium EQ25
Hi all,
I've been reading some great information on this forum.
My understanding is the recommended CYA level for a SWG pool is 70-80ppm. But if I can aim for a particular target, is 70ppm or 80ppm preferred for my pebblecrete SWG pool?
My pool water chemistry at the moment is:
FC 5
pH 7.7
TA 70
CH 400
CYA 70
Salt 4400 (400 higher than the recommended for my SWG)
Temp 27 Celsius
CSI -0.17
Any suggestions on my pool chemistry are very welcome.
Thanks to all contributors.
I've been reading some great information on this forum.
My understanding is the recommended CYA level for a SWG pool is 70-80ppm. But if I can aim for a particular target, is 70ppm or 80ppm preferred for my pebblecrete SWG pool?
My pool water chemistry at the moment is:
FC 5
pH 7.7
TA 70
CH 400
CYA 70
Salt 4400 (400 higher than the recommended for my SWG)
Temp 27 Celsius
CSI -0.17
Any suggestions on my pool chemistry are very welcome.
Thanks to all contributors.