Ic40 cold water light on. Water is 84 degrees

[gonzalezce7]

I just replaced the flow switch and thermistor a month ago.
I live in south FL. It’s never too cold!

can I clip a flow switch wire to stop it from thinking the water is cold? What wire?

 

[Jimrahbe]

7,

I am not sure if the same thermistor is used for the cold water reading or not, but it is worth a try.

Here is a diagram showing the wires and colors.. I would cut the green wire to take the thermistor out of the circuit.




It also shows how to add a standard temp prob in place of the thermistor.

Thanks,

Jim R.

 

[setsailsoon]

High 7, Jim's way is preferable so you don't lose the flow switch protection.