My Esther Williams 27 round just went poof after a crazy storm that came through. Never seen anything like this. It’s the only single piece all aluminum wall pool you can buy that I know of. What do fold recommend? 
I want to cry
- Thread starter DaHole
- Start date
- Jul 21, 2013
- 54,447
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jun 22, 2014
- 48,499
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Ouch, that really looks like it took a beating.
I know my 27' is getting up there in it's age, and I have been looking at replacements. I have been leaning toward all resin - uprights, walls, and rails. Aurora makes them.
I also really like the Radiant Metric pools, and their wall construction. However, they are still an aluminum wall. They are 2" thick, and are EPS foam in the middle, so a rust spot is not going to turn into a zipper, but still aluminum can corrode.
I go back and forth between the two.
I know my 27' is getting up there in it's age, and I have been looking at replacements. I have been leaning toward all resin - uprights, walls, and rails. Aurora makes them.
I also really like the Radiant Metric pools, and their wall construction. However, they are still an aluminum wall. They are 2" thick, and are EPS foam in the middle, so a rust spot is not going to turn into a zipper, but still aluminum can corrode.
I go back and forth between the two.
MITBeta
Gold Supporter
- May 28, 2020
- 1,238
- Pool Size
- 13000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
