We have 2 deck jets individually plumbed, when they are on it seems too loud so I have been trying to find a water to lower this without losing the distance of the arch. I contacted Jandy but they don't have other nozzle options. I found I could insert a piece of rubber tubing with a smaller hole and this achieves the desired result when my pump is on low speed but if high speed kicks in it will blow the tubing out of the nozzle. Any ideas as I would like to keep the deck jets on no matter the pump speed. I typically run on low with the valve for the deck jets and 3 returns on so I would think the returns would be able to handle the additional pressure provided on high speed which only runs 10 psi on filter gauge.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk