Ok. Tested FC last night and early this morning. It read 5.0 on both readings. CC was 0. I did notice the Aquapure computer of theSWG read No Flow when I checked it several last night and early this morning so I'm guessing it's something w the unit. I'm disconnecting the SWG tonight for inspection. Have not done this before. Anything to look for? The manual mentions scale but I'm not real sure how easy this is to inspect.
Sent from my iPhone using Tapatalk
To run an OCLT make sure the SWG is set to 0% so it is not adding chlorine to the pool while it is on.
The sensor might be starting to fail and will switch between flow and no flow. That was the first symptom of the all my failed sensors when I had the Aquapure. If your sensor needs to be replaced make sure you get the latest design of sensor as we have had several reports now of the new design having much better results than the old sensors. I believe the new sensors have a small box inline with the cable.