This is long sorry but you need some background .This is a new pool about 2 weeks old the day after it was filled a guy with an excavator ran over my overflow line unknown to anyone the day after that it started to rain a lot !I ended up with the water 1/4 inch from the top of the pool .The builder showed up a day later cleared the over flow line then dropped off the planet! Water level was perfect after that .I assumed the pool builder was checking on it till he handed it over to me (wrong ) so 4 days later I had a low salt petri dish for two or three days ! I added salt & water got swg going again . I found you guys about 2 days later then added some bleach ordered a test kit which I got yesterday This is where I am at now .
4/21/2016 7:15am air temp 65 water temp 72
OTO test PH 7.5 CL 15<30 ORANGE
DPD test FC 24.5 CC 0 TC 24.5 CH 100 TA 200 CYA 40
Fill Water CL5 BR10 PH 7.5
Today I backwashed the filter Start up press was 13 psi added water to proper level added 320 oz of 10% bleach if my pool math is correct I should be at 33 FC target is 28 I cannot babysit the pool because I haven't moved in yet (end of the month I will) The water has started to clear some I can see the sides on the deep end now I will check chemistry again in the morning am I missing anything ? This is South Alabama your always about 10 min from a thunder storm!
4/21/2016 7:15am air temp 65 water temp 72
OTO test PH 7.5 CL 15<30 ORANGE
DPD test FC 24.5 CC 0 TC 24.5 CH 100 TA 200 CYA 40
Fill Water CL5 BR10 PH 7.5
Today I backwashed the filter Start up press was 13 psi added water to proper level added 320 oz of 10% bleach if my pool math is correct I should be at 33 FC target is 28 I cannot babysit the pool because I haven't moved in yet (end of the month I will) The water has started to clear some I can see the sides on the deep end now I will check chemistry again in the morning am I missing anything ? This is South Alabama your always about 10 min from a thunder storm!