I have a Pentair Intellichlor (IC-40) SWG that indicates under 4000 hrs used. Yesterday, the SWG stopped working - with the Cell light going RED after the two minute starting cycle. The last two times this happened (over the last 3 seasons), replacing the flow/temp switch corrected the issue. Now I have the same problem again and I'm tired of replacing flow switches. Does anyone know how I can bypass the temp sensor so the cell will keep working even if water temperature is too low? I'm a big boy and can read a thermometer - I know I can't run the SWG below 65 degrees or so. Thanks for any help you can provide!