Hooking new Black & Decker Pump to Hayward EC75a filter

[Raldin]

I just purchased a new VS Black & Decker pump and am trying to hook it into my EC75a filter. The connection from the old super pump was really simple with the SP1485 part. Now that I can't use that part, what is the best way for me to make that transition from the filter to the new pump? Thanks!

 

[1poolman1]

The pump likely came with 1.5" unions as well as 2." A 1.5" male adapter threaded into the lower side of the filter with Teflon tape (at least 3 wraps), a little 1.5" PVC pipe and 3-90s is all you should need.

 

[Raldin]

The pump likely came with 1.5" unions as well as 2." A 1.5" male adapter threaded into the lower side of the filter with Teflon tape (at least 3 wraps), a little 1.5" PVC pipe and 3-90s is all you should need.

Thanks. Yes, it did come with 1.5 and 2" unions. I wasn't sure if the threads would be standard to pvc schedule 40. But sounds like it is?