Help!!! Leaking from multiport valve

[tommyboyrn]

Opening pool today fairly uneventful until fired filter up.....leaking from multiport valve

 

[tommyboyrn]

What could be causing this and do i need new port

 

[JamesW]

Picture of whole system?

 

[JamesW]

Pentair 2" Top Mount Valve: 263085, 262525 Parts - INYOPools.com

Pentair 2" Top Mount Valve: 263085, 262525 - INYOpools.com has the largest selection of swimming pool and spa replacement parts with over 70,000 parts in stock. Order today and save!

www.inyopools.com

 

[tommyboyrn]

Here is my system...i have heater to left thats not in puc

 

[JamesW]

What is the pressure?

Maybe you just need a new O-ring.

 

[tommyboyrn]

Pressure appeared to be what it was last year...less than 20....bout 19 i think

 

[JamesW]

Try replacing the O-ring.

This is the valve.

Pentair HiFlow Multiport Valve 263085

The 6 Position clamp style Multiport Valve is for use with Pentair Tagelus TA60, Sand Dollar 80 and Sta-Rite Cristal-Flo II 26 filter models and features 2" threaded inlet and outlet.

sunplay.com

 

[tommyboyrn]

Well i just turned it back on to double check pressure and its not leaking now......

 

[JamesW]

https://www.pentair.com/content/dam/extranet/nam/pentair-pool/residential/catalogs/2023-pool-product-catalog/2023-product-catalog-by-category-sections/valves/sec24_rp_valves_2023.pdf

 

[JamesW]

It looks like the O-ring might not be available separately.

Part #8 is 272568Z Valve Top Assembly.

 

[tommyboyrn]

Well...its still leaking.....not as bad. Ordered a new valve assembly....will tear old one apart and see if i can replace o ring and keep as a spare

 

[tommyboyrn]

So i am replacing the multi port valve....but when i attach new one it doesnt want to seat onto filter using new O ring....so i put old oring on, seats well and go on.....turn everything on....small drip on edge of filter between MPV/filter.

So i say..ok...put new Oring on.....tear everything apart again....put new oring on....BUT ITWILL NOT SEAT INTO FILTER TO SAVE MY LIFE....

ANYONE HAVE ANY TIPS TO GET THIS TO SEAT...IM GOING CRAZY

 

[tommyboyrn]

Well after alot of prayer, patience and some encouragement from my daughter it slid in using a couple of rachet straps to provide some downward pressure as I gently twisted.....so far so good.