Hi
My Levels were as follows this morning:
FC = 0
PH = 7.6
CYA = 75
Water was cloudy, could not see the bottom. FC had been zero for over 24 hours and the cloudiness was only getting worse, even though I was running my SWG at 100%. I took a cup of water to the local pool store and they told me that my levels looked good except the FC = 0, just like I thought. I added 4 Gallons of shock per there instructions, within 1 hour my pool turned from cloudy to green cloudy? Why would adding shock make my pool turn green? I called the pool store they said my pool was probably already on the verge of turning green. They said wait an hour or so and it'll start to get better.
Any advice?
My Levels were as follows this morning:
FC = 0
PH = 7.6
CYA = 75
Water was cloudy, could not see the bottom. FC had been zero for over 24 hours and the cloudiness was only getting worse, even though I was running my SWG at 100%. I took a cup of water to the local pool store and they told me that my levels looked good except the FC = 0, just like I thought. I added 4 Gallons of shock per there instructions, within 1 hour my pool turned from cloudy to green cloudy? Why would adding shock make my pool turn green? I called the pool store they said my pool was probably already on the verge of turning green. They said wait an hour or so and it'll start to get better.
Any advice?