Hayward goldmine aqua plus No display

[rndog44]

Hello everyone, I have a Hayward goldmine aqua plus salt cell generator and when I opened the pool last week the display and light doesn’t come up/on. I tried to reseat the display, that didn’t work, tried turning the beakers off and on, no joy. I’ve seen a video on YouTube about a thermistor replacement but I’m not sure that will work with my board. I have a G1-011049F-1 F, has anyone experienced this or have any advice. I’m not super handy, but would like to try something before I have to blow a grand for a new board. Thanks in advance.

Rich

 

[ajw22]

Instead of spending a grand to replace the AquaPlus board in your old system I suggest you spend a bit more and get the OmniPL Upgrade and move to a new modern system.

Hayward ProLogic to OmniPL Upgrade Kit w/Web

 

[rndog44]

Instead of spending a grand to replace the AquaPlus board in your old system I suggest you spend a bit more and get the OmniPL Upgrade and move to a new modern system.

Hayward ProLogic to OmniPL Upgrade Kit w/Web

That's a valid point, I hate being tied to an unreliable display screen. Is the install hard or do I need a tech?

 

[ajw22]

Is the install hard or do I need a tech?

I don't know your capabilities. It takes basic electrical wiring skills.

Study your system and the OmniPL Installation Manual and see if you understand what is required.

Biggest complexity is understanding How to do the software Configuration for your devices in the OmniPL.

 

[rndog44]

ordered the Hayward ProLogic to OmniPL Upgrade Kit w/Web yesterday. Saw a video on how too install shouldn't be a problem. Thanks for the advice.

Sincerely,
Rich