My check system light is on and it says low salt but I have tried everything and I can’t get it to turn off. I just cleaned the salt cell so I’m waiting to see if that does anything. I have cleaned everything and did what other people have told me to do and it’s still on. System is a Hayward Goldline Prologic
Hayward Goldline Prologic Check system light low salt
- Thread starter jakev205
- Start date
- Jul 21, 2013
- 52,789
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
This is the basic information we need...
This is the basic information we need...
- Report all readings when you..
- Go to the diagnostic screen, note the readings and then press the + button to reverse the polarity.
- When the new numbers appear, see what they are.
- Then, press + again and note the new readings.
- What are the first seven characters of the cell and box serial numbers?
- What is the actual salinity and how are you measuring it?