Hard plumbing intex 24' above ground pool
- Thread starter dcon40
- Start date
I found the part I needed at Lowes too, instead of Home Depot. I ended up using the 1 1/2 inch box adapter. Here's the link to it on the Lowes website.
http://www.lowes.com/ProductDisplay?par ... &cId=PDIO1
http://www.lowes.com/ProductDisplay?par ... &cId=PDIO1
wow thank you, I thought this was all a joke I wnt to two Lowes and they coulnt help me so I ended up buying them at HD they are very close, I am trying to upload the pictures to photobucket. Than you very much 
Actually, no. I just used the 1.5 inch box adapters and 1.5 inch couplings. All of my piping is 1.5 inch, with the exception of the fountain which is 1 inch.
http://s1332.photobucket.com/user/willi ... 5.jpg.html
http://s1332.photobucket.com/user/willi ... 9.jpg.html
http://s1332.photobucket.com/user/willi ... 5.jpg.html
http://s1332.photobucket.com/user/willi ... 9.jpg.html
got it, but let me twll you that the coupling with the screw I could not find any where.
Are you talking about the part that goes through the pool wall? If so, that's the return fitting that came with the pool. I simply took the factory valve assembly off and used the 2-piece nut that was on it.
Hello every one, thank you for your help I was able to hardplum the intex pump and salt water filter i have a lot of photos i like to upload to photo bucket hoping it will help others with the plumbing. I will post them Rear soon as I can.
My next project will be a deck, I have seen some decks on youtube but they are for round pools if any one has any videos on how to build a deck for a rectangular pool please let me know thanks.
Here are some pictures of the pool set up and of the salt water system and sand filter. will post more later hope this helps. Go to photo bucket link 
- Nov 3, 2011
- 71
I bought those same lights - they worked good for two days. Then one got full of water. Then the second one went on the brink. So I returned them and got better pool light. Hope you have better luck with those lights
can someone post a pic of how the box adapter is used in the hard plumb? also what king of glue did you use for the white pvc to the grey conduit?
Ame,
Here's some close-up pictures of the box adapter with and without the collar to attach to the pool return. There are other pictures in the PhotoBucket libary that may help as well. I used the gasket from the Intex return and put the flat side against the flat side of the box adapter. I just used standard PVC cement and primer for all of the connections, including that of the electrical box adapter.
http://s1332.photobucket.com/user/willi ... 1.jpg.html
http://s1332.photobucket.com/user/willi ... a.jpg.html
http://s1332.photobucket.com/user/willi ... 0.jpg.html
Here's some close-up pictures of the box adapter with and without the collar to attach to the pool return. There are other pictures in the PhotoBucket libary that may help as well. I used the gasket from the Intex return and put the flat side against the flat side of the box adapter. I just used standard PVC cement and primer for all of the connections, including that of the electrical box adapter.
http://s1332.photobucket.com/user/willi ... 1.jpg.html
http://s1332.photobucket.com/user/willi ... a.jpg.html
http://s1332.photobucket.com/user/willi ... 0.jpg.html