I've been fighting this pool for two weeks since firing the pool company. Although it looks better than a once a week treatment, it's still not there. Any help is appreciated.
40,000 gallons
FC/TC is 0 (after 10 gal of 8.25% bleach and 50 lbs of chlorine "shock" from Leslie's over the last two weeks.
PH is 7.5
TA is 230
CH is 120
CYA is 0
Pool is green and cloudy. Although, I can see the bottom now on the shallow end. An improvement over two weeks ago.
Running a Hayward Pro-Series sand filter
I've been bringing the chlorine up between 6-8 PPM, but it bottoms out after 2 to 3 days. I was fighting high PH til a week ago when I dropped two gallons of muriatic acid in it. It's maintained between 7.2 and 7.5 PH for a week now. Can't get the color and clarity out of it. I'm sure stabilizer will help, but I'd think with as much chlorine as I've put in it, lack of stabilizer would be over ridden by sheer volume. Thoughts?
Sent from my SAMSUNG-SM-G870A using Tapatalk
40,000 gallons
FC/TC is 0 (after 10 gal of 8.25% bleach and 50 lbs of chlorine "shock" from Leslie's over the last two weeks.
PH is 7.5
TA is 230
CH is 120
CYA is 0
Pool is green and cloudy. Although, I can see the bottom now on the shallow end. An improvement over two weeks ago.
Running a Hayward Pro-Series sand filter
I've been bringing the chlorine up between 6-8 PPM, but it bottoms out after 2 to 3 days. I was fighting high PH til a week ago when I dropped two gallons of muriatic acid in it. It's maintained between 7.2 and 7.5 PH for a week now. Can't get the color and clarity out of it. I'm sure stabilizer will help, but I'd think with as much chlorine as I've put in it, lack of stabilizer would be over ridden by sheer volume. Thoughts?
Sent from my SAMSUNG-SM-G870A using Tapatalk