So we have a cracked union with our salt cell. Where do I get a new one to replace it? Does it have to be specific to the Jandy PLC 1400? Just found it tonight, so shut down the pump. (Was running pump at night to cool pool off through solar, so will have to figure this out in the morning, but wanted to jump on here for suggestions where to buy the union). Thanks for your help!
Getting a new union for Jandy salt cell..where?
- Thread starter SWpisces
- Start date
- Jul 21, 2013
- 53,726
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Jandy uses a proprietary thread on their unions.
You can get this kit and cutout your unions and glue in a pipe and then replace the unions...
saltpoolstore.com
You can get this kit and cutout your unions and glue in a pipe and then replace the unions...
Jandy AquaPure 3-Port Cell Union Kit
This kit of unions is suitable for all AquaPure 3-Port salt water chlorine generator systems if the plumbing unions require replacing. This kit is also commonly used when changing from an older AquaPure 2-Port salt water cell to a newer 3-Port salt water cell.
saltpoolstore.com
Thank you Allen!
Now to do a temp fix until the new kit arrives. Has anyone used Water-weld and it worked?
Now to do a temp fix until the new kit arrives. Has anyone used Water-weld and it worked?
Won't work. Add some liquid chlorine until you can get the repair completed.